+370 690 15625 daumantas.janciauskas@axioma.eu
×
QALCOSONIC E3 – NEW GENERATION ULTRASONIC HEAT AND COOLING METER (BTU)
QALCOSONIC E3 ultrasonic heat meter is designed to measure the heat and cooling energy consumption, where data are recorded in two separate registers. The meter is used in the district heating objects (residential houses, companies and organizations, heat supply facilities, etc.).
APPROVALS:
- MID
- EN1434
- 2014/32/EU
- LoRaWAN
ADVANTAGES:
- Flexible meter configurations.
- Metering parameters can be set by users:
- choose required measurement units;
- set the place of installation (return or supply);
- configure the impulse inputs and outputs;
- control computing modules.
- The heating and cooling energy is collected in different registers
- Possibility of annual or monthly reports
- Possibility to register maximum and average monthly parameter values
- Heat-transfer medium characteristics settings
- The electronic block may be mounted separately from the flow metering part
- The flow sensor can be installed in any position
- Measurement tariff option
- Communication modules: MBus, W-MBus 868 MHz (only on-board), ModBus, LoRa, BACnet
QALCOSONIC E3 – NEW GENERATION ULTRASONIC HEAT AND COOLING METER (BTU)
QALCOSONIC E3 ultrasonic heat meter is designed to measure the heat and cooling energy consumption, where data are recorded in two separate registers. The meter is used in the district heating objects (residential houses, companies and organizations, heat supply facilities, etc.).
APPROVALS:
- MID
- EN1434
- 2014/32/EU
- LoRaWAN
ADVANTAGES:
- Flexible meter configurations.
- Metering parameters can be set by users:
- choose required measurement units;
- set the place of installation (return or supply);
- configure the impulse inputs and outputs;
- control computing modules.
- The heating and cooling energy is collected in different registers
- Possibility of annual or monthly reports
- Possibility to register maximum and average monthly parameter values
- Heat-transfer medium characteristics settings
- The electronic block may be mounted separately from the flow metering part
- The flow sensor can be installed in any position
- Measurement tariff option
- Communication modules: MBus, W-MBus 868 MHz (only on-board), ModBus, LoRa, BACnet
SPECIFICATIONS
MID
DN15-DN100
Measurement of heat-transfer medium flow
ultrasonic
Impulse inputs / outputs
universal
WMBUS modes
manufacturer’s protocol (two-way), Wireless MBus S1 and T1 modes
Communication modules
Combined communication module options. MBus, RF, MBus and RF. Additional module connection: ModBus / BACnet / Mbus / CL / MiniBus / Lora